Zenitel

TKIE-2

Extended IP Kit with Dual Ethernet Ports

Product code: 1008132020

  • SIP
  • ONVIF Conformant
  • IC-Edge
  • ICX-AlphaCom
  • HD Voice
  • Exigo

Description

The TKIE-2 is the extended model in our IP Intercom Kit range, designed as our most flexible integration platform. It delivers the same high-quality audio performance as the TKIS-2 kit, while adding several enhanced features. These include an additional RJ45 port for dual Ethernet connectivity, dual relays, and a convenient header for easy integration of audio inputs and outputs — such as line-level signals and accessories like headsets or handsets.

The TKIE-2 also includes general I/O and signal relay capabilities. For applications requiring high-power switching, it can be paired with the TA-10 Relay Module, which provides two DPDT relays suitable for high-voltage or high-current loads.

Technical specifications

AUDIO
Codecs G.711, G.722, G.729
Frequency range, G.722 Codec 200 Hz - 7000 Hz
Audio technology Full open duplex, switched open duplex
Sound level detection (scream alarm)
Automatic gain control
Automatic volume control (AVC)
Acoustic Echo Cancellation (AEC)
Noise cancellation
Internal speaker amplifier 10 W class D
Supported microphone technologies Digital MEMS microphone, Electret microphone
Recommended loudspeaker impedance 8 ohm
NETWORKING AND PROTOCOLS
Application Protocols SIP, SIPS, HTTP, HTTPS, TFTP, RTP, SRTP, RTCP, RTSP, DHCP, SNMP, Vingtor-Stentofon CCoIP®, NTP, ONVIF, WS-Discovery
IP Versions IPv4 & IPv6
LAN protocols Power over Ethernet (IEEE 802.3 a-f) Network Access Control (IEEE 802.1x)
Supervision functions Keep alive test, tone test, status reports
SIP support RFC 3261 (SIP base standard) RFC 3515 (SIP refer) RFC 2976 (SIP info), SIP using TLS, RFC 5630 SIPS URI scheme
DTMF support RFC 2833, 2976 (SIP info)
Integration and API Connected to ICX-AlphaCom through AlphaCom protocol ACDP
Connected to Zenitel Connect Pro though Zenitel Link
ONVIF
HARDWARE
Ethernet connector 2 x RJ45
General inputs and outputs 6 (configurable)
Outputs 12mA as LED drivers
Change-over relays (NO+NC+COM) Max: 250VAC/220VDC, 2A, 60W
Power options PoE and or external power supply 24 VDC (16 – 48 V)
PoE (power over Ethernet) IEEE 802.3af standard, Class 0 (0.44W to 12.95 W)
Power consumption Idle 1.8W, max 12W (depending on volume)
Construction
Dimensions (HxWxD) 74 x 106 x 30 mm / 2.9” x 4.2” x 1.2”
Weight 0.1 kg / 0.2 lbs
Encapsulation material Steel
Warranty 2 Years standard warranty, extendible up to total of 5 years (additional fee)
ENVIRONMENTAL COMPLIANCES
Operating temperature range -40° to 70° C / -40° to 158° F
Storage temperature range -40° to 70° C / -40° to 158° F
Relative humidity < 95% not condensing
Approvals
EMC EN 61000-6-1, EN 61000-6-3, EN 50121-4, FCC part 15
Sustainablilty REACH, RoHS

Dimensions

More in this family