
Açıklama
ILD122 Profesyonel rafa monte edilebilir loop sürücüsü
Geliştirilmiş güç çıkışı, ödün vermeden olağanüstü değer sunar. Metal kaybı düzeltmesi ve konuşma için optimize edilmiş kazanç kontrolü gibi Ampetronic ekipmanlarında bulunan tüm özelliklere sahiptir.
ILD122 çok kompakt ve zariftir, serbest durmaya, duvara monte edilmeye veya rafa monte edilmeye uygundur.
Uygulama Alanları
Konferans salonları
Tiyatrolar
Spor salonları
Eğitim ortamları
İbadet yerleri
Konferans salonları
ILD122 ile standart olarak sağlanan ekipmanlar
Kullanım kılavuzu ve kurulum talimatları
197 x 252 mm döngü sistemi mevcut işareti (işitme engelli logosu)
Bölgeye özel şebeke kablosu
Döngü konektörü
Özellikler
- >200m2'ye kadar alan kapsamı
- Düşük ömür boyu maliyet
- Mükemmel kanıtlanmış güvenilirlik
- 5 yıl garanti
- Eşsiz ses kalitesi
- Mükemmel anlaşılabilirlik
- Konuşma için optimize edilmiş kazanç kontrolü
- Yüksek voltaj boşluğu, yüksek frekans kırpılmasını önler
- Metal kayıp düzeltici, metal yapılardan kaynaklanan frekansa bağlı kayıpları düzeltir
- Çok kompakt: 215 x 220 x 44 mm
- Mikrofon (XLR) ve hat girişleri
- Herhangi bir ses girişi gereksinimi için kapsamlı giriş adaptörleri mevcuttur
- Tavsiye, tasarım ve kurulum için ücretsiz teknik destek hattı
- Uzun kablo uzunluklarına uygun yüksek voltaj boşluğu
Aksesuarlar
ILD122 isteğe bağlı aksesuarlar
Ampetronic, kurulum için geniş bir yelpazede ek aksesuar sağlayabilir – ihtiyaçlarınızı satış ekibimizle görüşün, uygulamanıza uygun malzeme ve ekipmanı temin edelim.
| Input adaptors | A range of input adaptors and interface cables to accept most audio source inputs, see table below |
| Installation Accessories | 18mm x 0.25mm copper tape PVC extrusion to protect copper tape Installation / warning tape to fix cable or tape to a floor |
| Wall mount brackets | WML1-U |
| Rack mount brackets | RM-1U |
| Phase shifter | SP5 for an array system requires a design which can be provided by Ampetronic |
Giriş adaptörleri ve ön yükselticiler
Uygun giriş adaptörü veya ön yükseltici kullanılarak, ILD122 diğer kaynaklardan birden fazla ek giriş veya ses girişi kabul edecektir:
| Input type | Adaptor |
| Additional microphone and / or line inputs | MP221 preamps can drive up to 2 mics + 2 line inputs |
| 100V line input Low impedance speaker line Line Level | ATT-UJ & ATT-UX transformer isolated attenuators |
| Unbalanced microphones | MAT1 adaptor |
Teknik özellikler
Perimeter Loops – Area Coverage (maximum)
| Room aspect ratio | 1:1 | 2:1 | 3:1 |
| Maximum area m2 | 120 | 150 | 200 |
For any Induction Loop System, area coverage is dependent on several factors. Please check these assumptions and contact Ampetronic for advice if required:
- Loop must be 1-2m above or below the receiver height
- There should be no metal structures in the plane of the loop
- Sufficient voltage to drive the loop – check the cable table below
Maximum Cable Length
The ILD122 is designed for SINGLE TURN loops for optimum audio quality.
- Loops with DC resistance from 0.2 to 1.8Ω
- Impedance up to a maximum of 2.0Ω
Maximum cable length is dependent on cable type and on the application:
| Cable type | Maximum Cable Length (m) | |
| Normal Use* | Transient Speech* | |
| 1.0mm2 copper | 76 | 87 |
| 2.5mm2 copper | 103 | 131 |
| 4.0mm2 copper | 108 | 140 |
| 1.8mm2 flat copper tape | 133 | 155 |
* Short term speech (e.g. service counter, airport PA system) can cope with limited clipping at high frequencies – Ampetronic recommends delivery of full current up to 1.2kHz for these applications.
Longer term usage or signals with music or high quality audio must deliver full current to at least 1.6kHz to prevent fatigue and give acceptable intelligibility. Many commercially available systems do not deliver sufficient voltage to reproduce critical high frequencies – ask us for more details.
ILD122 Specifications
INPUTS
| Güç | 35 W 230 V AC nominal, 45-65 Hz [120 V option available] Power switch and LED indicator on front panel |
| Microphone input | XLR balanced microphone input for 200-600 Ω microphones; 15 dB user selectable gain boost; + 15 V DC phantom power (selectable); sensitivity – 70 dBu; front panel recessed gain control |
| Line input | 6.4 mm jack socket balanced line input; sensitivity – 30 dBu; overload protected; front panel recessed gain control |
| Link I/O | 6.4 mm jack insert point for connection of SP5 phase shifter 0 dBu signal can be used for recording |
OUTPUTS
| Drive voltage | 8.5 Vrms (12V peak) at maximum output current |
| Drive current | • 3.5 Arms (5 Apk) continuous 1 kHz sine wave • Short term peaks >7 Apk • Front panel recessed control • Drive current indicated on 4-LED display in 3 dB increments |
| Loop connector | Wieland ST17/2 (supplied) |
| Loop Monitor | Provides access to actual audio signal in loop via a 3.5 mm stereo headphone connector on front panel |
AUDIO SYSTEM
| Freq. response | 80 Hz to 6.5 kHz |
| Distortion | THD+N |
| Automatic Gain Control | The AGC is optimised for speech. Range >36 dBu Front panel recessed input level control |
| Metal loss correction | Corrects system frequency response due to metal structures in a building. Gain constant at 1 kHz, adjustable gain slope from 0 to 3 dB per octave This does not compensate for signal loss from metal structures, which can be significant |
ADDITIONAL FUNCTIONS
| Fault Monitoring | Three LED fault indicators on the front panel: • Overload – delivering over the rated current • Overheat – unit is too hot (mutes output signal) • Loop error – short circuit / open circuit error |
| Ancillary | To supply Ampetronic ancillary units ±15 V DC 0.15 A power outlet on rear panel |
| Cooling | Cooling is by natural convection from product casing |
PHYSICAL
| Boyutlar | Half width 1U 19″ rack mount Width 215 mm Depth 220 mm Height 44 mm |
| Mounting options | • Freestanding • 1U 19″ rack mount (requires additional rack tray) • Wall mounting (requires additional brackets) |
| Ağırlık | 1.8kg |
| Environment | IP 20 protection; 20 to 90% relative humidity; 0 to 35 ºC |

